I have the perfect solution for you! The Curt A16 5th Wheel Trailer Hitch for Nissan Titan XD Towing Prep Package # C16520-16026 is a confirmed fit for the factory towing package on your 2017 Nissan Titan XD.
This 5th wheel hitch will simply drop into the factory towing package on your XD and then secure into place once the handles are rotated into place. You can lock the arms with the Roadmaster Padlock # RM-305 for added security.
This hitch offers a jaw that provides 360-degree contact... view full answer...
When it comes to installing a front suspension enhancement system on your 2016 Nissan Titan XD The Timbren Front Suspension Enhancement System # TFXF1004A will work with your 2WD vehicle.
The Timbren system has no drilling required and has a 4,000 pound capacity. Using this system will not affect the empty ride of your vehicle.
I attached a review video link below. view full answer...
When installing the Timbren # TNRTTNA you should only need to loosen the axle U-bolts, and not completely remove them. I can't say that it would be the worst idea to replace a bolt that was likely torqued to install, but it's not something we carry. Most likely these would be specific to your 2018 Nissan Titan xD so you would need to source those from an auto parts store or your Nissan dealer. From what I was able to find from my research it looks like those bolts are designed to be torqued... view full answer...
If your 2021 Nissan Titan XD doesn't already have a 7-Way then you need to install the Hopkins # N40975. This gives you everything you need for your brake controller and to control the trailer lights.
Then to add brakes and a 7-Way setup on your 3,500 lb utility trailer axle you need the following parts:
- Brake Mounting Flange # 4-35 (if axle doesn't already have this on either side)
- Self-Adjusting Electric Trailer Brake Kit # AKEBRK-35-SA
- Brake Mounting Hardware # BRKH10B
-... view full answer...
Yes, the Brophy Clamp On Camper Tie-Downs # HSSF will fit on your 2021 Nissan Titan XD as long as your external bed rails do not exceed 5-1/2", you don't have a drop in bed liner, plastic bed rails, double-walled beds, or side-step beds. You shouldn't need to remove your factory bed rails unless they are raised rails. You will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs # TDHP to secure your camper to the truck bed. view full answer...
You will need the Plug-In Wiring Adapter # 3050-P to install the Tekonsha Prodigy P3 trailer brake controller on your 2024 Nissan Titan XD. view full answer...
The plug-in adapter that you need to use to install the Tekonsha Prodigy P3 # 90195 to your 2017 Nissan Titan XD is part # 3050-P. The connector that this installs into is located under your driver's side dash above the gas pedal as you can see in the attached photo and installation video. view full answer...
The correct lube plate for the discontinued Reese Titan 16 Slider RP30869 is the Fifth Wheel Lube Plate # 83003.
Review videos for both products have been linked for you to review. view full answer...
The Husky Silver Series # HT31326-32042 does measure 14-1/2 inches from your truck's bed to the top of the hitch head at its lowest setting.
The Curt A16 # C16521 has the same measurement of 17-1/2 inches on its lowest setting.
Industry standard rails are spaced about 20-1/2 inches from side to side and 22 inches from front to back. So it sounds like yours are industry standard.
If you can provide me with the dimensions of your lights and some pictures I'd be happy to find the correct... view full answer...